How To Attach Wreaths To Exterior Windows

If you love the expect of wreaths nestled on windows but you are not sure how to hang them then you have come up to the right place. Hither are several of my become-to tricks on how to hang wreaths on windows with ribbon without damaging your window or trim.

At Christmas fourth dimension you will see so many beautiful wreaths hanging from windows merely have you lot ever wondered how to hang wreaths from windows with ribbon without messing upwards the trim or window?

Those wreaths look so pretty hanging there from a gorgeous piece of ribbon. Many people have windows where the meridian window slides down which makes hanging a wreath with ribbon pretty piece of cake.

Only for those of the states who practice not take that luxury I have two tips on how to hang wreath with ribbon.

This post contains chapter links, which means I receive a committee if you brand a purchase using the links beneath. All opinions are all my own.

How to Hang Wreaths from Windows

I mentioned in that location are two simple ways to hang wreath on window. One is using a staple gun and the other is a suction hook and tape.

But before we get started if you need a wreath for the holidays and all the same haven't decided on a wreath for your windows check out my post of whimsical, rustic, elegant Christmas wreath ideas or go check out my friend Debra's beautiful wreaths at The Whimsical Door.

Debra sent me these charming lamb's ear wreaths to share with you in this projection.

I also got my front door Christmas wreath from her last year. Isn't it adorable! When y'all gild a wreath if you want some extra ribbon y'all can buy the ribbon also which is what I did with these lamb's ear wreaths.

I wanted to repeat this ribbon from the front door. I love carrying over details into other rooms like this ribbon.

Now that you lot have a wreath selected let'due south jump into how to hang your wreath on your windows.

Adhere Ribbon to the Wreath

Your first step in hanging your wreath is to decide how to hang it with the ribbon. Here are the steps I used for hanging this lambs ear wreath with ribbon.

Kickoff, measure out a piece of ribbon to however long you recollect information technology needs to be. For my window which is 36″ wide by 60″ long, I used a ribbon cut at 58″ long.

And so I marked 12″ downwardly on the ribbon with a directly pin. This reminds me of where I want the knot to become when I tie it.

Next, I tie a sailors knot right where the straight pin is located.

If y'all do not know how to tie a crewman'southward knot simple make a normal outset loop or necktie like y'all are tieing your shoes. Then with the ribbon that is coming out of the top proceed it directly and with the other ribbon curve it backside the straight slice.

Next, accept the direct piece and run behind the other piece and through the pigsty. Pull the tie gently keeping a nice flat knot on the forepart.

Now that you lot have the knot completed position the knot under the inside of the wreath and move away from any greenery so it sits up again the core of the wreath.

You should have some tails hanging out inside the center of the wreath.

Hang a Wreath with Suction Hook

If you do not want whatever holes on your window trim and then this is your plan. Hanging a wreath on a window with a ribbon using a suction hook is very simple but takes more fourth dimension.

So if yous have time and the right tools attempt this DIY project.

First, start by applying your suction to the window. I generally concord my wreath up on the window to decide where I want it to go. And then based on where the wreath volition hang on the hook I breathe a little fog onto the dorsum of the suction loving cup and then press it onto the window.

Side by side, I place the wreath on the hook and gently grab the ribbon betwixt my fingers. I pull the ribbon straight and even until it reaches the elevation of the window seal.

And then I employ some tape and tape across the ribbon onto the window seal at the elevation.

Yay! You are all finished if yous decide to do this method.

How to Hang a Wreath with Ribbon on a Window using a Staple Gun

Now for the quicker wreath hanging DIY.

Only like the other wreath hanging steps you will have your ribbon in manus and smooth information technology out pulling information technology towards the top center of the window seal.

Side by side, brand sure you take the wreath in just the right spot on the window. Then have the staple gun and while holding the finish of the ribbon loop in ane hand slide the staple gun over again the ribbon and upon the seal towards the back closest to the window.

Once you lot have information technology in merely the correct spot put a staple into the trim. All yous need is one staple. Information technology works like a charm and when you are set to take the ribbon down simple use a screwdriver and wiggle it between the staple and the ribbon. It will pop correct out.

And there you have it. Two unproblematic ways to hang wreaths on interior windows.

Determination

I hope this tutorial has inspired you or given you the courage to decorate your windows for the holidays. Y'all can use these steps to hang wreath year effectually too.

If you need help hanging a wreath with a ribbon on your door without damaging the door I have a post that will help.

If you are thinking of hanging wreath on windows what room are you considering? Nosotros would love to know. Now that you know how to hang wreaths here are tips on decorating with wreaths.

Happy Decorating!

If you enjoyed this post, sign up to receive new decor ideas each week. FREE EMAIL SUBSCRIPTION

Prep Time 15 minutes

Active Time xv minutes

Full Time xxx minutes

Materials

• Ribbon
• Straight pins
• Record
• Suction hook

Source: https://lifeonsummerhill.com/how-to-hang-wreaths-on-windows/

Posted by: carsondereter.blogspot.com

Share this post